喷雾干燥杨梅粉玻璃化转变温度和结块特性研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Studies on Glass Transition Temperature and Caking Properties of Spray-Dried Bayberry Powder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    杨梅粉在加工和贮藏过程中很容易结块而使品质变差,为避免和减轻其结块,本实验采用差示扫描量热仪研究了杨梅粉不同水分活度与其玻璃化转变温度-Tg-之间的关系,温度湿度对杨梅粉结块的影响等,结果表明杨梅粉水分活度-Aw-与Tg呈线性关系,Tg=45758-1688 Aw -R2=08631- ;杨梅粉在加工过程中,尽可能使环境温度低于15℃,相对湿度低于22%;杨梅粉结块过程中经历粉的塌陷,粘结,最终导致结块.

    Abstract:

    Bayberry powder is easy to cake leading to the bad quality during the processing and storage. In order to avoid and lighten caking, the followed experiments were carried out, such as the correlation between water activity and glass transition temperature by differential scanning calorimetry -DSC- and the effects of temperature and relative humidity on caking of bayberry powder. Glass transition temperature of bayberry powder had linear correlation with the water activity, Tg= 45758-1688 aw -R2=08631-. The appropriate processing temperature and relative humidity of bayberry powder should be lower than 25℃ and 22%, respectively. Collapse, stikiness, and caking were the three steps of bayberry powder caking.

    参考文献
    相似文献
    引证文献
引用本文

弓志青,陈相艳,程安玮,石贤权,王文亮.喷雾干燥杨梅粉玻璃化转变温度和结块特性研究[J].食品科学技术学报,2013,31(2):43-46.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-06-16
  • 出版日期: